|
- Forced Convection Furnaces
- Clean Room Solutions
- Furnaces with Radiation Heating
- High-Temperature Furnaces
- Continuous Furnaces, Electrically Heated or Gas-Fired
- Salt Bath Furnaces for Chemical Hardening of Glass, Electrically Heated or Gas-Fired
- Chamber Kilns
- Top loaders
- Gas-fired Kilns
- Air Circulation Furnaces
- Dewaxing Furnaces, Electrically Heated or Gas-Fired
- Chamber Furnaces for Heat Cleaning, gas-fired with integrated thermal afterburner
- Muffle/Preheating/Ashing Furnaces and Accessories
- Assay Furnaces up to 1300 °C
- Chamber Furnaces for Annealing, Hardening and Brazing
- Chamber Furnaces with Brick Insulation or Fiber Insulation up to 1400 °C
- High-Temperature Furnaces/Sintering Furnaces
- Ovens, Chamber Ovens and Forced Convection Chamber Furnaces
- Clean Room Solutions
- Tube Furnaces and Accessories
- Customized Tube Furnaces
- Working Tubes for Tube Furnaces
- Melting Furnaces up to 1500 °C
- Fast-Firing Furnaces up to 1300 °C
- Gradient or Lab Strand Annealing Furnaces up to 1300 °C
- Retort Furnaces
- Charging aid for models SAL 30/45 - SAL 500/85
- Forced convection pit-type retort furnaces up to 850 °C
- Temperature Measurement in Gas Supply Systems
- TUS Measuring Frame for Protective Gas Box
- Gas Supply System
|
- Tube Furnaces
- Float-Glass Test Kiln with Wire Heating
- Laboratory Melting Furnace SC 8 with SiC Rod Heating
- Fast-Firing Decorating Furnaces with Infrared Heating
- Glass Melting Furnaces
- Fusing furnace
- Glass beads cooling furnace
- Gas-Fired Chamber Furnaces up to 1600 °C
- Continuous Furnaces, Electrically Heated or Gas-Fired
- Retort Furnaces up to 1100 °C resp. 3000 °C
- Laboratory Furnaces
- Zirconia Sintering Furnaces
- Sintering Furnace LT 02/13 CR for Cobalt-Chromium
- Chamber Furnaces for Annealing after Laser Sintering
- Accessories for Annealing after Laser Sintering
- Burnout Furnaces
- Production Furnaces for Debinding and Presintering or for Sintering
- Which Furnace for which Process?
- Melting Furnaces and Holding Furnaces
- Control and documentation alternatives for melting furnaces
- Cleaning Furnace for Riser Tubes, Electrically Heated
- Forced Convection Furnaces
- Drop-Bottom Furnaces, Electrically Heated or Gas-Fired
- Quench and Tempering Plants for Steel
- Quench Tanks
- Chamber and Bogie Hearth Furnaces
- Dewaxing Furnaces, Electrically Heated (N ../WAX)
|
- Chamber Furnaces, Electrically Heated
- Fusing Furnaces, Tub Furnaces and Top-Hat Furnaces
- Retort Furnaces
- Catalytic and Thermal Post Combustion, Exhaust Gas Washer
- Chamber Furnaces for Processes with High Vaporization Rates of Organic Matter or for Thermal Cleaning by Ashing, Electrically Heated or Gas-Fired
- Furnaces with Radiation Heating up to 1400 °C
- Gas-fired Chamber Furnaces up to 1400 °C
- Pit-Type and Top-Loading Furnaces with or without Air Circulation, Electrically Heated or Gas-Fired
- High-Temperature Furnaces up to 1800 °C
- Hot-wall retort furnaces up to 1100 °C
- Manual or semi-automatic tempering plants
- Retort furnaces for catalytic debinding
- Bottom loading retort furnaces up to 1100 °C
- Pit-type retort furnaces up to 1100 °C
- Cold-wall retort furnaces up to 2400 °C
- Bottom loading retort furnace up to 2400 °C
- Retort furnace cooling systems
- Chamber furnaces LH 15/.. - LH 216/..
- Protective gas boxes and charging plates for models LH 15/.. - LH 216/..
- Chamber furnaces with drawer bottom or as a bogie NW 150 - NW 1000
- Protective gas boxes and protective gas hoods for chamber furnaces NW 150 - NW 1000
- Chamber furnaces N 7/H - N 641/13
- Protective gas boxes and charging plates for models N 7/H - N 641/13
- Charging forks
- Tool shop hardening systems MHS 31, MHS 41 and MHS 61
- Protective gas hardening system SHS 41
- Forced convection chamber furnaces NA 30/45 - N 500/85HA and protective gas boxes
- Protective gas boxes for automotive (CQI-9) and aeronautic (AMS7NADCAP) norms
- Sealed forced convection chamber furnaces NA-I and NA-SI
- Forced convection pit-type furnaces SAL 30/45 - SAL 500/85 and protective gas boxes
- High-Temperature Furnaces with MoSi2 Heating Elements up to 1800 °C
- Ovens, also with Safety Technology According to EN 1539
- Chamber Ovens
- Ashing Furnaces with Integrated Exhaust Gas Cleaning
- Catalytic and Thermal Post Combustion Systems, Exhaust Gas Washer
- Cooling Platforms and Charging Devices
- Vacuum Pump
- Continuous Operation Furnaces
|
Customer Login
EMAIL US
+971 6 5436933