A PHP Error was encountered

Severity: Notice

Message: Undefined index: cal_meta_title

Filename: controllers/calibration.php

Line Number: 38

A PHP Error was encountered

Severity: Notice

Message: Undefined index: cal_meta_keyword

Filename: controllers/calibration.php

Line Number: 39

A PHP Error was encountered

Severity: Notice

Message: Undefined index: cal_meta_desc

Filename: controllers/calibration.php

Line Number: 40

Calibration Servicecalibration
logo
0
Shopping Cart
Request QuoteRequest Quote
Only Authorised Fluke Bio-Medical Calibration Center for Defibrillator Analyzers, Electrical Safety Analyzers, Electrosurgery Analyzers, Infusion Pump Analyzers, Patient Monitor Simulators in the GCC Our Force calibration services include tool calibration for a variety of measuring hand tools as well as calibration of masters and standards Our Temperature calibration services include tool calibration for a variety of measuring hand tools as well as calibration of masters and standards Our Mass calibration services include tool calibration for a variety of measuring hand tools as well as calibration of masters and standards Our Humidity calibration services include tool calibration for a variety of measuring hand tools as well as calibration of masters and standards Our Torque calibration services include tool calibration for a variety of measuring hand tools as well as calibration of masters and standards Our Flow calibration services include tool calibration for a variety of measuring hand tools as well as calibration of masters and standards Our Volumetric calibration services include tool calibration for a variety of measuring hand tools as well as calibration of masters and standards Our Pressure calibration services include tool calibration for a variety of measuring hand tools as well as calibration of masters and standards Our Electrical calibration services include tool calibration for a variety of measuring hand tools as well as calibration of masters and standards Our dimensional calibration services include tool calibration for a variety of measuring hand tools as well as calibration of masters and standards

Authorised Fluke Biomedical Calibration Center - General Tech Services

General Tech's biomedical calibration services provide the highest level of accuracy, traceability, and reliability possible. Conductivity/pH meters, defibrillator analyzers, infusion pump analyzers, flow meters and patient simulators are only a few examples of the instruments we calibrate.

Customers receive a Certificate of Calibration with each calibrated instrument, and electronic record backup is available at no charge. Our computer systems track instruments throughout the calibration/repair process, and detailed unit histories are archived for customer reference.

We are the only audited and authorized Fluke calibration in the Middle East that can inspect, calibrate and adjust the below instruments:

  • Defibrillator Analyzers
  • Digital Pressure Meters
  • Electrical Safety Analyzers
  • Electrosurgery Analyzers
  • Gas Flow Analyzers
  • Incubator Radiant Warmer Analyzers
  • Infusion Pump Analyzers
  • Patient Monitor Simulators
  • Phototherapy Radiometer
  • Portable Oscilloscopes


Being a part of Fluke Biomedical, we also take care of Raysafe calibration. Raysafe products include :

  • RaySafe X2
  • RaySafe X2 Solo
  • RaySafe Xi
  • RaySafe Solo
  • RaySafe ThinX
  • RaySafe DXR+


Masters, Tool and Gauge Calibration

The calibration lab at General Tech, known as General Construction Lab Calibration, has been serving varied industries with dimensional calibration services and certified reporting for years. It is a leading, full-service calibration lab with the credentials and services to assure your measuring hand tools and instruments measure precisely and efficiently. Our dimensional calibration services include tool calibration for a variety of measuring hand tools, from calipers and stop watches to angle plates and irons, as well as micrometer calibration, gauge calibration, and calibration of masters and standards.

The Dimensional Calibration Process

Dimensional calibration is done by comparing the performance output of a hand tool, gauge or another measuring instrument with a measurement standard to confirm that the device produces results which either meet or exceed that standard’s criteria. The details of these results are clearly reported on your Calibration Certificate, along with “as found

Pipettes, Burettes, Beakers and More

We provide services for a variety of volumetric instruments including pipettes calibration, beakers calibration and burettes.

Hydrometer, Anemometer, Flow Meter Calibration and More

wWe at GCLC provide services for a variety of flow instruments including flow meter calibration, anemometer calibration, velocity meter and hydrometer calibration.

Torque Sensor, Torque Wrench Calibration and More

Companies that work with torque instruments find that maintaining traceability and reliable measurement with routine torque calibration supports the quality of their operations. We at GCLC issue a Calibration Certificate for each item calibrated with all results and details of the torque calibration performed, as well as information on traceability and our DAC (Dubai Accreditation Centre) accreditation to ISO/IEC 17025.

Torque calibration can be performed at our laboratory with loads up to 1500Nm Ft. Lbs. The wide range of capabilities includes torque wrench calibration service, torque sensor calibration, tensiometer calibration and verification of many other instruments within the ranges listed below.

The Torque Calibration Process

All results from your force calibration service will be clearly detailed in a Calibration Certificate, a report covering “as found” and “as left” conditions, traceability, accreditation, complete calibration results and any adjustments or repairs made during calibration services. Torque calibration requirements are generated from a number of resources including manufacturers, ANSI/ASME, Federal Specifications as well as customer requirements.

Torque wrench calibration, screwdriver (preset) and torque sensor calibration makes use of a torque system with the option to select the appropriate transducer for the range of the instrument from among multiple choices. Torque multipliers are also calibrated with transducers, but require the use of two transducers. One transducer measures the generated torque input, while the other measures the torque output.

Psychrometer, Recorder, Hygrometer Calibration & More

Humidity calibration is a necessity for keeping humidity-reading instruments operating reliably and within accuracy specifications for a reasonable length of time. Humidity is a major environmental factor in many processes and manufacturing facilities, therefore, maintaining reliable instruments for the accurate measurement of relative humidity is critical for quality control.

We provide humidity calibration services at our lab in Sharjah, UAE. You will receive a Calibration Certificate with full details for each calibrated item.

Weight, Balance, Comparator Calibration and More

We at GCLC provide a range of mass calibration services including balance calibration, scale calibration, weight calibration and comparator calibration at our climate-controlled facility in Sharjah, UAE. Some instruments can also be calibrated on-site at our customers’ facilities by our specially trained field technicians.

Our calibration standards are traceable to national standards and mass calibration is accredited by DAC (Dubai Accreditation Centre). Weight calibration is available for a wide range of classes, including A, B, C, F, M, P, Q, S, S-1, T, 1, 1.1, 2, 3, 4, 5 and 6, as defined in the specification NBS Handbook 105-1 & 44, NBS Circular 547 ANSI/ASTM E617. Our lab has equipment capable of performing balance calibration, scale calibration and comparator calibration on test items with capacities over 1,000 lbs.

You will receive timely, accurate results and an easy-to-read Calibration Certificate with a full report of all work and results. When your instrument is due for re-calibration, we will send you a reminder notice. Pick-up and delivery services are offered for customers in UAE at no additional charge.

The Mass Calibration Process

GCLC is equipped with a number of scales designed to handle mass calibration of standards and instruments at various weights and accuracies. The calibration entails a weight comparison from the scale readout against a known standard or mass value. The precision mass standards used for calibration are of a known accuracy.

Thermometer, Pyrometer, Thermocouple Calibration and More

We at GCLC offer services to meet all of your calibration needs including DAC (Dubai Accreditation Centre) accredited and traceable temperature calibration for ovens, furnaces and temperature-reading instruments.

Capabilities are available for most temperature-reading instruments including recorder, hygrometer, RTD probe, pyrometer and thermocouple calibration. Thermometer calibration for digital, infra-red, bimetal, surface and liquid in glass models is also provided. Our technicians survey temperatures at various locations in the oven or furnace to accurately identify the need for adjustments that will maintain consistent temperature throughout. Temperature calibration and uniformity surveys are essential for ensuring accurate and consistent production and efficient use of energy. At GCLC, we work with top-of-the-line calibration equipment to verify optimal performance from your temperature instruments.

Our field technicians can calibrate ovens, furnaces, temperature controllers and other instruments right at your facility, and you can count on a reasonable turnaround with every order.

The Temperature Calibration Process

We utilise a number of different processes to perform temperature calibration on a wide range of instruments both in our lab and on the field. Digital recorder and thermometer calibration takes place on a Fluke multi-process calibrator.

Pyrometer calibration, thermocouple calibration and some recorder and thermometer calibration are completed using dry-wells and liquid-baths with temperature ranges from -45° C to 1500° C. The liquid in temperature baths and atmosphere in Dry wells/blocks are set to a specific temperature for calibration. Once the appropriate temperature is reached, the test instrument and a standard are placed into the bath or well for a comparison of readings. Surface probes and thermometers are calibrated on special hot plates. Temperature calibration is usually a 5-point inspection, unless more inspection points are requested by the customer.

Load Cell, Force Gauge Calibration and More

Instruments such as dynamometers, force gauges and load cells are dependent on accurate force calibration in order to consistently deliver their specified performance.

At GCLC, force gauge, dynamometer and load cell calibration are performed on equipment with capacities over 100,000 LBF of tension and compression. Our force calibration and other calibration services are traceable and accredited to ISO/IEC 17025.

All results from your force calibration service will be clearly detailed in a Calibration Certificate, a report covering “as found

The Force Calibration Process

Force calibration is performed in one of two ways at our laboratory depending on the weight capacity of the equipment being tested. Most often, equipment with a capacity below 500 LBF will be calibrated using a hand-held dead weight test for tension and compression. Instruments over this weight capacity are generally tested on a computerised force calibration machine with a capacity of 3000kN. Force transducers in three ranges are available for use.

The first step is exercising the customer’s equipment to be sure it is in working order for the process to follow. Next, the appropriate equipment is selected and the standard is set. A 5-point calibration will be run for most instruments at every 20 percent of capacity, although a higher accuracy instrument will require 10 points at 10 percent of capacity.

Barometer, Manometer, Pressure Gauge Calibration and more

Routine pressure calibration will help ensure the accuracy and precision of your pressure instruments. The use of reliable instruments is essential for efficiency, quality and safety. We at GCLC perform pressure calibration up to 20,000 PSI. Our services include barometer calibration, manometer, pressure transducer calibration, dead weight tester and pressure gauge calibration.

With every pressure calibration you receive a Calibration Certificate from us with all the information you need about the condition of your instrument, calibration results, traceability, our accreditation to ISO/IEC 17025, and repairs and adjustments made.

The Pressure Calibration Process

Computerised pressure modules with capacities from vacuum to 20,000 PSI are used to perform pressure calibration and record the readings. It is customary to exercise the instrument to its full capacity three times before beginning calibration. As with most calibrations, a standard with a known value or capacity is compared to the instrument being calibrated during the pressure calibration process.

Most instruments undergo a 5-point pressure calibration, whereby the inspection occurs at every 20 percent of capacity. A higher accuracy pressure transducer or pressure gauge calibration will include 10 inspection points at every 10 percent of capacity.

Electrical Calibration

For convenient electrical or electronic calibration of meters and other instruments, General Construction Lab Calibration is your most reliable source. Our range of services includes multimeter calibration, chart recorders calibration, tachometer calibration, and electronic calibration of many other meters and instruments with DC and AC voltage, DC and AC current, and DC resistance. With highly trained technicians and high-tech equipment, our electrical calibration provides results that will give you confidence in the capabilities of your electronic instruments.

The Electrical Calibration Process

General Construction Lab Calibration has individual documented procedures that are followed for each make and model of instrument receiving electrical calibration to ensure standardised testing. The instrument manufacturers’ “accuracies

Instrument Calibration

  • Gauge Blocks up to 20 inches
  • Length Standards/Micrometer Standards up to 120 inches
  • Pitch Micrometer Standards
  • Profilometer Standards
  • Surveillance Masters
    • Gauge Blocks up to 20 inches
    • Length Standards/Micrometer Standards up to 120 inches
    • Pitch Micrometer Standards
    • Profilometer Standards
    • Surveillance Masters
    • Thread Set Plug Masters
    • Thread Measuring Wires
  • Thread Set Plug Masters
  • Thread Measuring Wires
  • Gauge Blocks up to 20 inches
  • Length Standards/Micrometer Standards up to 120 inches
  • Pitch Micrometer Standards
  • Profilometer Standards
  • Surveillance Masters
  • Thread Set Plug Masters

Masters and Standards

  • Gauge Blocks up to 20 inches
  • Length Standards/Micrometer Standards up to 120 inches
  • Pitch Micrometer Standards
  • Profilometer Standards
  • Surveillance Masters
  • Thread Set Plug Masters
  • Thread Measuring Wires

Calibration Capabilities

  • Flow cups
  • Flow measuring devices
  • Rotameter
  • Wet gas flow meter
  • Water meter

Calibration Capabilities

  • Anemometer Calibration (Velocity Meter)
    • Vane or Hot Wire
  • Flow Meter Calibration (Rotameter)
  • Flow Instrument Calibration
    • Gas, Liquid and Mass
  • Hydrometer Calibration
    • Glass Tube

Calibration Capabilities

  • Cable Tensiometer Verification
  • Pull Tester
  • Push Pull Tester
  • Torque Multiplier
  • Torque Screwdriver
  • Torque Wrench Calibration

Calibration Capabilities

  • Hygrometer Calibration
  • Psychrometer Calibration – Dew Point, Sling
  • Data Logger Calibration
  • Pyrometer Calibration
  • Recorder Calibration
      • Humidity (Dial Type)
      • Temperature and Humidity
  • RTD Probe Calibration (ITS-Coefficient)
  • Thermocouple Calibration (no readout) and module

Calibration Capabilities

  • Weight Calibration
    • Below 1 kg (2 lbs) to 50 kgs (100 lbs)
    • Classes: A, B, C, F, M, P, Q, S, S-1, T, 1, 1.1, 2, 3, 4, 5 and 6
  • Balance Calibration (Scale Calibration)
    • 0 to over 1,000 lbs
  • Comparator Calibration
    • 0 to over 1,000 lbs

Calibration Capabilities

  • Hygrometer Calibration
    • Humidity
    • Dial Type/Temperature/RH Probe
  • Oven/Furnace Uniformity Surveys
  • Psychrometer Calibration – Dew Point, Sling
  • Pyrometer Calibration
  • Recorder Calibration
    • Chart Temperature
    • Digital Temperature
    • Humidity (Dial Type), Temperature and Humidity
  • System Accuracy Tests
  • Temperature Uniformity Test
  • Temperature Controllers/Digital Readout Calibration
  • RTD Probe Calibration (ITS-Coefficient)
  • Thermocouple Calibration – “K”, “J” , “R”, “S” etc.
    • No readout and module
  • Thermometer Calibration
    • Bimetal, Liquid in Glass, Surface
    • Digital
    • Infrared

Calibration Capabilities

  • Dynamometer Calibration
  • Force Gauge Calibration
    • Tension, Compression
  • Load Cell Calibration
    • Tension, Compression

Calibration Capabilities

  • Barometer Calibration
    • +1m bar
  • Compound Pressure/Vacuum Gauge
  • Dead Weight Tester
    • Hydraulic
    • Pneumatic
  • Density Meter Calibration
  • Differential Pressure Gauge Calibration
    • Minimum
    • Microtector
  • Digital Manometer Calibration
  • Pressure Calibrator
  • Pressure Gauge Calibration
    • Accuracy from 2% to 0.1% or better
    • To 20,000 PSI
  • Pressure chart recorder
  • Pressure Transducer Calibration
    • With or without readout
    • To 20,000 PSI

Calibration Capabilities

  • Ammeter Calibration (Clamp-on)
  • Calibrator Calibration
    • Hand-Held
    • Transmation
    • Other models from leading manufacturers
  • Clamp meter Calibration
  • Contour Probe Calibration
  • Decade Box Calibration
  • Documenting Process Calibrator
  • Frequency Counter Calibration
  • High Resistance Meter Calibration
  • Hi-Pot Calibration
  • Light Meter/Lux Meter Calibration
  • MegOhmMeter Calibration
  • Multimeter Calibration
  • Oscilloscope Calibration
  • Power Supply Calibration
  • RCL Meter Calibration
  • Shunt Calibration
  • Standard Resistor Calibration
  • Tachometer Calibration/Stroboscope Calibration
  • Tong Meter Calibration
  • Wattmeter
  • Tachometer
  • Data loggers
  • Chart Recorders
  • Counters/Timer
  • Earth Testers
  • Flash Testers
  • Insulation Testers
  • High Voltage Testers

© 2015 General Tech Services LLC. All Rights Reserved.